DESCRIPCIÓN GENERAL

The ADuM1201 are dual-channel digital isolators based on the Analog Devices, Inc., iCoupler technology. Combining high speed CMOS and monolithic transformer technologies, these isolation components provide outstanding performance characteristics superior to alternatives, such as optocouplers. By avoiding the use of LEDs and photodiodes, iCoupler devices remove the design difficulties commonly associated with optocouplers.

The typical optocoupler concerns regarding uncertain current transfer ratios, nonlinear transfer functions, and temperature and lifetime effects are eliminated with the simple iCoupler digital interfaces and stable performance characteristics. The need for external drivers and other discrete components is eliminated with these iCoupler products. Furthermore, iCoupler devices consume one-tenth to one-sixth the power of optocouplers at comparable signal data rates.

The ADuM1201 isolators provide two independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide). Both devices operate with the supply voltage on either side ranging from 2.7 V to 5.5 V, providing compatibility with lower voltage systems as well as enabling a voltage translation functionality across the isolation barrier. In addition, the ADuM1200/ADuM1201 provide low pulse width distortion (<3 ns for CR grade) and tight channelto-channel matching (<3 ns for CR grade). Unlike other optocoupler alternatives, the ADuM1200/ADuM1201 isolators have a patented refresh feature that ensures dc correctness in the absence of input logic transitions and during powerup/power-down conditions.

The ADuM1201W is automotive grade versions qualified for 125℃  operation. See the Automotive Products section for more information.

 

CARACTERÍSTICAS

Encapsulado SOIC de 8 terminales, cuerpo estrecho, conforme a RoHS

Funcionamiento de bajo consumo

Funcionamiento a 5 V

1,1 mA por canal como máximo de 0 Mbps a 2 Mbps

3,7 mA por canal como máximo a 10 Mbps

8,2 mA por canal como máximo a 25 Mbps

Funcionamiento a 3 V

0,8 mA por canal como máximo de 0 Mbps a 2 Mbps

2,2 mA por canal como máximo a 10 Mbps

4,8 mA por canal como máximo a 25 Mbps

Comunicación bidireccional

Traducción de nivel 3 V/5 V

Funcionamiento a alta temperatura: 125°C

Alta velocidad de datos: dc a 25 Mbps (NRZ)

Características de temporización precisas

Distorsión de anchura de impulso máxima de 3 ns

3 ns máximo de adaptación de canal a canal

Alta inmunidad a transitorios en modo común: >25 kV/μs

Seguridad y homologaciones reglamentarias

Reconocimiento UL

2500 V rms durante 1 minuto según UL 1577

Aviso de aceptación de componentes CSA 5A

Certificado de conformidad VDE

DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12

VIORM = 560 V pico

Cualificado para aplicaciones de automoción

 

APLICACIONES

Aislamiento multicanal de tamaño crítico

Aislamiento de la interfaz SPI/convertidor de datos

Aislamiento del transceptor RS-232/RS-422/RS-485

Aislamiento del bus de campo digital

Vehículos eléctricos híbridos, monitor de batería y accionamiento de motor

 

INFORMACIÓN SOBRE APLICACIONES

DISEÑO DE PCB

Los aisladores digitales ADuM1200/ADuM1201 no requieren circuitos de interfaz externos para las interfaces lógicas. Se recomienda encarecidamente la derivación de la fuente de alimentación en los pines de alimentación de entrada y salida.

El valor del condensador debe estar comprendido entre 0,01 μF y 0,1 μF. La longitud total del cable entre ambos extremos del condensador y la clavija de la fuente de alimentación de entrada no debe superar los 20 mm.

CORRECCIÓN DE CC E INMUNIDAD AL CAMPO MAGNÉTICO

Positive and negative logic transitions at the isolator input send narrow (~1 ns) pulses to the decoder via the transformer. The decoder is bistable and is therefore either set or reset by the pulses, indicating input logic transitions. In the absence of logic transitions of more than ~1 μs at the input, a periodic set of refresh pulses indicative of the correct input state is sent to ensure dc correctness at the output. If the decoder receives no internal pulses for more than about 5 μs, the input side is assumed to be unpowered or nonfunctional, in which case the isolator output is forced to a default state by the watchdog timer circuit.

Los ADuM1201 son extremadamente inmunes a los campos magnéticos externos. La limitación de la inmunidad al campo magnético del ADuM1201 viene dada por la condición en la que la tensión inducida en la bobina receptora del transformador es lo suficientemente grande como para activar o desactivar falsamente el decodificador. El siguiente análisis define las condiciones en las que esto puede ocurrir.