ОПИСАНИЕ

The LT3093 is a high performance low dropout negative linear regulator featuring ADI’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. The device can be easily paralleled to further reduce noise, increase output current and spread heat on a PCB.

The LT3093 supplies 200mA at a typical 190mV dropout voltage. Operating quiescent current is nominally 2.35mA and drops to 3µA in shutdown. The device’s wide output voltage range (0V to –19.5V) error amplifier operates in unity-gain and provides virtually constant output noise, PSRR, bandwidth, and load regulation independent of the programmed output voltage. Additional features are a bipolar enable pin, programmable current limit, fast startup capability and programmable power good to indicate output voltage regulation. The regulator incorporates a tracking function to control an upstream supply to maintain a constant voltage across the LT3093 to minimize power dissipation and optimize PSRR.

The LT3093 is stable with a minimum 4.7µF ceramic output capacitor. Built-in protection includes internal current limit with foldback and thermal limit with hysteresis. The LT3093 is available in thermally enhanced 12-Lead MSOP and 3mm × 3mm DFN Packages.

 

ОСОБЕННОСТИ

Ultralow RMS Noise: 0.8µVRMS (10Hz to 100kHz)

Ultralow Spot Noise: 2.2nV/√Hz at 10kHz

Ultrahigh PSRR: 73dB at 1MHz

Output Current: 200mA

Wide Input Voltage Range: –1.8V to –20V

Single Capacitor Improves Noise and PSRR

100µA SET Pin Current: ±1% Initial Accuracy

Single Resistor Programs Output Voltage

Программируемое ограничение тока

Low Dropout Voltage: 190mV

Output Voltage Range: 0V to –19.5V

Programmable Power Good and Fast Start-Up

Bipolar Precision Enable/UVLO Pin

VIOC Pin Controls Upstream Regulator to Minimize Power Dissipation and Optimize PSRR

Minimum Output Capacitor: 4.7µF Ceramic

12-Lead MSOP and 3mm × 3mm DFN Packages

 

ПРИЛОЖЕНИЯ

RF and Precision Power Supplies

Very Low Noise Instrumentation

High Speed/High Precision Data Converters

Medical Applications: Diagnostics and Imaging

Post-Regulator for Switching Supplies

 

ИНФОРМАЦИЯ О ПРИЛОЖЕНИЯХ

The LT3093 is a high performance low dropout negative linear regulator featuring ADI’s ultralow noise (2.2nV/√Hz at 10kHz) and ultrahigh PSRR (73dB at 1MHz) architecture for powering noise sensitive applications. Designed as a precision current reference followed by a high performance rail-to-rail voltage buffer, the LT3093 can be easily paralleled to further reduce noise, increase output current and spread heat on the PCB. The device additionally features programmable current limit, fast start-up capability and programmable power good.

The LT3093 is easy to use and incorporates all of the protection features expected in high performance regulators. Included are short-circuit protection, safe operating area protection, and thermal shutdown with hysteresis.

 

Output Voltage

The LT3093 incorporates a precision 100µA current reference flowing into the SET pin, which also ties to the error amplifier’s inverting input.That connecting a resistor from SET to ground generates a reference voltage for the error amplifier. This reference voltage is simply the product of the SET pin current and the SET pin resistor. The error amplifier’s unity-gain configuration produces a low impedance version of this voltage on its noninverting input, i.e. the OUTS pin, which is externally tied to the OUT pin.

The LT3093’s rail-to-rail error amplifier and current reference architecture allows for a wide output voltage range from 0V (using a 0Ω resistor) to VIN minus dropout. An NPN-based input pair is active for a 0V to –0.8V output and a PNP-based input pair is active for output voltages beyond –1.5V, with a smooth transition between the two input pairs from –0.8V to –1.5V output. The PNP-based input pair offers the best overall performance; refer to the Electrical Characteristics table for details on offset voltage, SET pin current, output noise and PSRR variation depending on the output voltage and corresponding active input pair(s).